Cisco CCNA / CCNP Certification Tutorial: Frame Relay End-To-End Keepalives
476
Computers > Computer Certification
Mar 1, 2007
Chris Bryant, CCIE #12933
Cisco CCNA / CCNP Certification Tutorial: Frame Relay End-To-End Keepalives
One of the first things you learned about Frame is that the LMI also serves as a keepalive, or a heartbeat - and if three consecutive LMIs are missed, the line protocol goes down. There's a limitation to LMI as a keepalive, though. The LMI is exchanged only between the DTE and the closest DCE. The LMI is therefore a local keepalive that does not reflect any possible issues on the remote end of the virtual circuit.
Taking the LMI concept to the next logical level, Frame Relay End-To-End Keepalives (FREEK, one of the least-heard Cisco acronyms for some reason) are used to verify that endpoint-to-endpoint communications are functioning properly.
What you have to keep in mind about FREEK is that each and every PVC needs two separate keepalive processes. Remember, with a PVC, there's no guarantee that the path taking through the frame relay cloud to get from R1 to R2 is going to be the same path taken to go back from R2 to R1. One process will be used to send requests for information and handle the responses to these requests; this is the send side. When the send side transmits a keepalive request, a response is expected in a certain number of seconds. If one is not received, an error event is noted. If enough error events are recorded, the VC's keepalive status is marked as down.
The process that responds to the other side's requests is the receive side.
This being Cisco, we've got to have some modes, right? FREEK has four operational modes.
Bidirectional mode enables both the send and receive process enabled on the router, meaning that the router will send requests and process responses (send side) and will also respond to remote requests for information (receive side).
Request mode enables only the send process. The router will send requests and process responses to those requests, but will not answer requests from other routers.
Reply mode enables only the receive process. The router will respond to requests from other routers but will initiate no requests of its own.
Finally, passive reply mode allows the router to respond to requests, but no timers are set and no events are tracked.
Frame Relay End-To-End Keepalive defaults:
Two send or receive errors must be registered in order for the VC to be considered down.
The event window size is three. The event window is the number of events considered by the router when determining the status of the VC. Therefore, using the defaults, two send or receive errors would have to be received within the event window of three events for the VC to be considered down.
The timer mentioned earlier - the amount of time a router waits for a response - is set to 10 seconds
Working with Frame Relay end-to-end keepalives is just one Frame skill you?ll need to pass the CCNP exams ? and I wouldn?t be surprised to see them on a CCIE exam. Know the details and you?re on your way to Cisco certification exam success! Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNA and CCNP tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages. You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website. For a FREE copy of his latest e-books, ?How To Pass The CCNA? and ?How To Pass The CCNP?, visit the website and download your free copies. You can also get FREE CCNA and CCNP exam questions every day! Get your CCNA study guide from The Bryant Advantage!
Taking the LMI concept to the next logical level, Frame Relay End-To-End Keepalives (FREEK, one of the least-heard Cisco acronyms for some reason) are used to verify that endpoint-to-endpoint communications are functioning properly.
What you have to keep in mind about FREEK is that each and every PVC needs two separate keepalive processes. Remember, with a PVC, there's no guarantee that the path taking through the frame relay cloud to get from R1 to R2 is going to be the same path taken to go back from R2 to R1. One process will be used to send requests for information and handle the responses to these requests; this is the send side. When the send side transmits a keepalive request, a response is expected in a certain number of seconds. If one is not received, an error event is noted. If enough error events are recorded, the VC's keepalive status is marked as down.
The process that responds to the other side's requests is the receive side.
This being Cisco, we've got to have some modes, right? FREEK has four operational modes.
Bidirectional mode enables both the send and receive process enabled on the router, meaning that the router will send requests and process responses (send side) and will also respond to remote requests for information (receive side).
Request mode enables only the send process. The router will send requests and process responses to those requests, but will not answer requests from other routers.
Reply mode enables only the receive process. The router will respond to requests from other routers but will initiate no requests of its own.
Finally, passive reply mode allows the router to respond to requests, but no timers are set and no events are tracked.
Frame Relay End-To-End Keepalive defaults:
Two send or receive errors must be registered in order for the VC to be considered down.
The event window size is three. The event window is the number of events considered by the router when determining the status of the VC. Therefore, using the defaults, two send or receive errors would have to be received within the event window of three events for the VC to be considered down.
The timer mentioned earlier - the amount of time a router waits for a response - is set to 10 seconds
Working with Frame Relay end-to-end keepalives is just one Frame skill you?ll need to pass the CCNP exams ? and I wouldn?t be surprised to see them on a CCIE exam. Know the details and you?re on your way to Cisco certification exam success! Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNA and CCNP tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages. You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website. For a FREE copy of his latest e-books, ?How To Pass The CCNA? and ?How To Pass The CCNP?, visit the website and download your free copies. You can also get FREE CCNA and CCNP exam questions every day! Get your CCNA study guide from The Bryant Advantage!
Write a Review
Add to My Favorite
Refer it to Friend
Report Article
Other links owned by this user
Policy routing is a major topic on your BSCI exam, and you'll find quite a bit of policy routing going on in today's production networks. But what exactly is policy routing? Policy-based routing, generally referred to as "policy routing", is the
Category:
Like TCP, BGP is connection-oriented. An underlying connection between two BGP speakers is established before any routing information is exchanged. This connection takes place on TCP port 179. As with EIGRP and OSPF, keepalive messages are sent out by
Category:
To pass your CCNA exam and earn this coveted certification, you must understand the details of port-based authentication. This knowledge has a great deal of value in production networks as well, since this authentication scheme is regularly implemented.
Category:
Whether you're on the road to the CCNA, CCNP, MCSE, or you're on any other computer certification track, the odds are that sooner or later, you're gog to fail an exam. It's happened to almost all of us, yours truly cluded. What you have to keep
Category:
Earning your CCNP certification and ing the BSCI exam depends on knowing the details of many Cisco technologies, ISIS chief among them. To help you prepare for exam success, here's a list of ISIS terminology and basic concepts that will help you
Category:
Your BCMSN and CCNP studies will include mastering the details of Spanning Tree Protocol (STP). While you learned some of these details in your CCNA studies, quite a bit of it may be new to you. Before going on to the intermediate and advanced STP
Category:
To ern your CCNA or CCNP certifiction, you've got to understnd the bsics of trunking. This isn't just CCNA topic - you must hve n dvnced understnding of trunking nd etherchnnels to pss the BCMSN exm nd ern your CCNP s well. Before we
Category:
To pass the BSCI exam an earn your CCNP, you've got to keep a lot of etails in min. It's easy to overlook the "simpler" protocols an services such as static routing an istance vector protocols. With this in min, here's a quick review of some
Category:
Part of studying for CCNA exam success is keeping all these new commands straight in your head! And let's face it, there are a lot of commands you need to know in order to pass the CCNA exam and earn that certification. Here's a review of some very
Category:
To pass he BCMSN exam and earn your CCNP cerificaion, you've go o know HSRP inside and ou. While he operaion and basic commands of HSRP are prey simple, here are some imporan deails ha are easily overlooked bu are vial in geing HSRP
Category:
ISDN is a huge topic on both your Cisco CCNA and BCRAN CCNP exams. While many ISDN topics seem straightforward, it?s the details that make the difference in the exam room and working with ISDN in production networks. Configuring and troubleshooting
Category:
Not only is your CCNA exam going to have questions on VLAN trunking protocol, almost any network that has more than one VLAN is going to have VTP running. Whether you're planning on passing the CCNA exam or just brushing up on your networking skills,
Category:
Imagine this. You have an appointment with a client to work on a server or router install. A few minutes before you're scheduled to be there, you decide there's something really good on TV you'd like to watch. Or you decide to go to the gym, or play a
Category:
When you're working on your BCMSN exam on your way to CCNP certification, you'll read at length about how Cisco routers and multilayer switches can work to provide router redundancy - but there's another helpful service, Server Load Balancing, that
Category:
When you're studying for the BSCI exam on the way to earning your CCNP certification, it's safe to say that BGP is like nothing you?ve studied to this point. BGP is an external routing protocol used primarily by Internet Service Providers (ISPs).
Category:
To pass the BCMSN exam and earn your CCNP, you've got to know HSRP inside and out! Part of that is knowing how the MAC address of the virtual router is derived, and another part is knowing how to change this address. We'll look at both features in this
Category:
To earn your Cisco CCNA certification and pass the BSCI CCNP exam, you have to know your protocol basics like the back of your hand! To help you review these important concepts, here's a quick look at the basics of RIPv1, RIPv2, IGRP, and
Category:
Dialer Watch is a vital part of your CCNA and CCNP studies, particularly for the BCRAN exam, but it's one of the most misunderstood technologies as well. To help you pass the CCNA and CCNP certification exams, here's a detailed look at Dialer
Category:
One f the first things yu learned abut Frame is that the LMI als serves as a keepalive, r a heartbeat - and if three cnsecutive LMIs are missed, the line prtcl ges dwn. There's a limitatin t LMI as a keepalive, thugh. The LMI is exchanged
Category:
Other links at Computers > Computer Certification
In this CCNA case study, we'll take some basic switching and trunking theory and put it into action. We have two routers (R2 and R3) along with two switches (SW1 and SW2). R2 is connected to SW1 at fast 0/2, and R3 is connected to SW2 at fast 0/3. Both
Category:
Whether you're on the road to the CCNA, CCNP, MCSE, or you're on any other computer certification track, the odds are that sooner or later, you're gog to fail an exam. It's happened to almost all of us, yours truly cluded. What you have to keep
Category:
RIP isn't exactly the most complex routing protocol on the CCNA exam, but that makes it easy to overlook some of the important you must keep in mind in order to pass the exam! To help you review for the exam, here are just a few of those
Category:
4. CCNA
CCNA stands for Cisco Certified Network Associate - a certification for IT professionals that is issued by Cisco Systems, Inc., one of the most successful computer networking companies. Cisco manufactures and markets a wide range of devices for both
Category:
Imagine this. You have an appointment with a client to work on a server or router install. A few minutes before you're scheduled to be there, you decide there's something really good on TV you'd like to watch. Or you decide to go to the gym, or play a
Category:
Site Sponsor
Directory Statistics
Articles: 68205
Categories: 501
Yahoo Entertainment
