CCNP Certification / BSCI Exam Tutorial: The BGP Neighbor Process
435
Computers > Computer Certification
Mar 1, 2007
Chris Bryant, CCIE #12933
CCNP Certification / BSCI Exam Tutorial: The BGP Neighbor Process
Like TCP, BGP is connection-oriented. An underlying connection between two BGP speakers is established before any routing information is exchanged. This connection takes place on TCP port 179. As with EIGRP and OSPF, keepalive messages are sent out by the BGP speakers in order to keep this relationship alive.
Once the connection is established, the BGP speakers exchange routes and synchronize their tables. After this initial exchange, a BGP speaker will only send further updates upon a change in the network topology.
The IGP protocols that use Autonomous Systems, IGRP and EIGRP, require prospective neighbors to be in the same AS. This is not true with BGP. Routers can be in different Autonomous Systems and still exchange routes. The BGP neighbors do not have to be directly connected, and often are not, but do need to be able to reach the IP addresses they use in their neighbor statements.
A BGP peer that is in the same AS is referred to as an Internal BGP (iBGP) Peer, where a BGP peer in another AS is an External BGP (eBGP) Peer.
A sample iBGP configuration:
Router bgp 100
Neighbor 10.1.1.2 remote-as 100
A sample eBGP configuration:
Router bgp 100
Neighbor 10.1.1.2 remote-as 200
Cisco recommends that eBGP peers be directly connected, where iBGP peers generally will not be.
Before we get too much farther into BGP theory, let?s get a configuration started. You?ll use the router bgp command to configure a router as a BGP speaker. Right after that, the neighbor command will be used to identify this BGP speaker?s potential neighbors. (The terms "peer" and "neighbor" are interchangeable in BGP, but it's the neighbor statement that is used to statically define neighbors. BGP is not capable of discovering neighbors dynamically.)
R1(config-router)#neighbor 172.12.123.3 remote-as 200
While almost all of the neighbor options are just that -- optional -- you do have to specify the BGP AS of the remote router. BGP has no mechanism to dynamically discover neighbors. Remember, BGP speakers do not have to be in the same AS to become peers. To verify that the remote BGP speaker has become a peer, run show ip bgp neighbor.
R1#show ip bgp neighbor
BGP neighbor is 172.12.123.3, remote AS 200, external link
BGP version 4, remote router ID 0.0.0.0
BGP state = Active
Last read 00:01:39, hold time is 180, keepalive interval is 60 seconds
Received 0 messages, 0 notifications, 0 in queue
Sent 0 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Default minimum time between advertisement runs is 30 seconds
The output here can be a little misleading the first time you read it. The first highlighted line shows 172.12.123.3 is a BGP neighbor, is located in AS 200, and is an external link, indicating that the neighbor is in another AS entirely. The second highlighted line shows the BGP state as Active. This sounds great, but it actually means that a BGP peer connection does not yet exist with the prospective neighbor.
So even though the show ip bgp neighbor output indicated that this is an Active neighbor relationship, that?s not as good as it sounds. Of course, the reason the peer relationship hasn?t been established is that we haven?t configured R3 yet!
R3(config)#router bgp 200
R3(config-router)#neighbor 172.12.123.1 remote-as 100
Verify the peer establishment with show ip bgp neighbor:
R3#show ip bgp neighbor
BGP neighbor is 172.12.123.1, remote AS 100, external link
BGP version 4, remote router ID 172.12.123.1
BGP state = Established, up for 00:01:18
Last read 00:00:17, hold time is 180, keepalive interval is 60 seconds
Local host: 172.12.123.3, Local port: 179 (BGP uses TCP Port 179)
Foreign host: 172.12.123.1, Foreign port: 11007
The peer relationship between R1 and R3 has been established.
Now that you know how the neighbor relationship itself is built, you need to start learning the many options of the neighbor command. You?ll have to master these to become a CCNP and CCIE! Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNP and CCNA tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages. You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website. For a FREE copy of his latest e-books, ?How To Pass The CCNA? and ?How To Pass The CCNP?, just visit the website! You can also get FREE CCNA and CCNP exam questions every day! Pass the CCNP exam with The Bryant Advantage!
Once the connection is established, the BGP speakers exchange routes and synchronize their tables. After this initial exchange, a BGP speaker will only send further updates upon a change in the network topology.
The IGP protocols that use Autonomous Systems, IGRP and EIGRP, require prospective neighbors to be in the same AS. This is not true with BGP. Routers can be in different Autonomous Systems and still exchange routes. The BGP neighbors do not have to be directly connected, and often are not, but do need to be able to reach the IP addresses they use in their neighbor statements.
A BGP peer that is in the same AS is referred to as an Internal BGP (iBGP) Peer, where a BGP peer in another AS is an External BGP (eBGP) Peer.
A sample iBGP configuration:
Router bgp 100
Neighbor 10.1.1.2 remote-as 100
A sample eBGP configuration:
Router bgp 100
Neighbor 10.1.1.2 remote-as 200
Cisco recommends that eBGP peers be directly connected, where iBGP peers generally will not be.
Before we get too much farther into BGP theory, let?s get a configuration started. You?ll use the router bgp command to configure a router as a BGP speaker. Right after that, the neighbor command will be used to identify this BGP speaker?s potential neighbors. (The terms "peer" and "neighbor" are interchangeable in BGP, but it's the neighbor statement that is used to statically define neighbors. BGP is not capable of discovering neighbors dynamically.)
R1(config-router)#neighbor 172.12.123.3 remote-as 200
While almost all of the neighbor options are just that -- optional -- you do have to specify the BGP AS of the remote router. BGP has no mechanism to dynamically discover neighbors. Remember, BGP speakers do not have to be in the same AS to become peers. To verify that the remote BGP speaker has become a peer, run show ip bgp neighbor.
R1#show ip bgp neighbor
BGP neighbor is 172.12.123.3, remote AS 200, external link
BGP version 4, remote router ID 0.0.0.0
BGP state = Active
Last read 00:01:39, hold time is 180, keepalive interval is 60 seconds
Received 0 messages, 0 notifications, 0 in queue
Sent 0 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Default minimum time between advertisement runs is 30 seconds
The output here can be a little misleading the first time you read it. The first highlighted line shows 172.12.123.3 is a BGP neighbor, is located in AS 200, and is an external link, indicating that the neighbor is in another AS entirely. The second highlighted line shows the BGP state as Active. This sounds great, but it actually means that a BGP peer connection does not yet exist with the prospective neighbor.
So even though the show ip bgp neighbor output indicated that this is an Active neighbor relationship, that?s not as good as it sounds. Of course, the reason the peer relationship hasn?t been established is that we haven?t configured R3 yet!
R3(config)#router bgp 200
R3(config-router)#neighbor 172.12.123.1 remote-as 100
Verify the peer establishment with show ip bgp neighbor:
R3#show ip bgp neighbor
BGP neighbor is 172.12.123.1, remote AS 100, external link
BGP version 4, remote router ID 172.12.123.1
BGP state = Established, up for 00:01:18
Last read 00:00:17, hold time is 180, keepalive interval is 60 seconds
Local host: 172.12.123.3, Local port: 179 (BGP uses TCP Port 179)
Foreign host: 172.12.123.1, Foreign port: 11007
The peer relationship between R1 and R3 has been established.
Now that you know how the neighbor relationship itself is built, you need to start learning the many options of the neighbor command. You?ll have to master these to become a CCNP and CCIE! Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNP and CCNA tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages. You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website. For a FREE copy of his latest e-books, ?How To Pass The CCNA? and ?How To Pass The CCNP?, just visit the website! You can also get FREE CCNA and CCNP exam questions every day! Pass the CCNP exam with The Bryant Advantage!
Write a Review
Add to My Favorite
Refer it to Friend
Report Article
Other links owned by this user
To pass your CCNA exam and earn this coveted certification, you must understand the details of port-based authentication. This knowledge has a great deal of value in production networks as well, since this authentication scheme is regularly implemented.
Category:
Your BCMSN and CCNP studies will include mastering the details of Spanning Tree Protocol (STP). While you learned some of these details in your CCNA studies, quite a bit of it may be new to you. Before going on to the intermediate and advanced STP
Category:
To earn your Cisco CCNA certification and pass the BSCI CCNP exam, you have to know your protocol basics like the back of your hand! To help you review these important concepts, here's a quick look at the basics of RIPv1, RIPv2, IGRP, and
Category:
To pass the BCMSN exam and earn your CCNP, you've got to know HSRP inside and out! Part of that is knowing how the MAC address of the virtual router is derived, and another part is knowing how to change this address. We'll look at both features in this
Category:
When you're working on your BCMSN exam on your way to CCNP certification, you'll read at length about how Cisco routers and multilayer switches can work to provide router redundancy - but there's another helpful service, Server Load Balancing, that
Category:
Like TCP, BGP is connection-oriented. An underlying connection between two BGP speakers is established before any routing information is exchanged. This connection takes place on TCP port 179. As with EIGRP and OSPF, keepalive messages are sent out by
Category:
Part of studying for CCNA exam success is keeping all these new commands straight in your head! And let's face it, there are a lot of commands you need to know in order to pass the CCNA exam and earn that certification. Here's a review of some very
Category:
Policy routing is a major topic on your BSCI exam, and you'll find quite a bit of policy routing going on in today's production networks. But what exactly is policy routing? Policy-based routing, generally referred to as "policy routing", is the
Category:
Whether you're on the road to the CCNA, CCNP, MCSE, or you're on any other computer certification track, the odds are that sooner or later, you're gog to fail an exam. It's happened to almost all of us, yours truly cluded. What you have to keep
Category:
Imagine this. You have an appointment with a client to work on a server or router install. A few minutes before you're scheduled to be there, you decide there's something really good on TV you'd like to watch. Or you decide to go to the gym, or play a
Category:
To pass he BCMSN exam and earn your CCNP cerificaion, you've go o know HSRP inside and ou. While he operaion and basic commands of HSRP are prey simple, here are some imporan deails ha are easily overlooked bu are vial in geing HSRP
Category:
ISDN is a huge topic on both your Cisco CCNA and BCRAN CCNP exams. While many ISDN topics seem straightforward, it?s the details that make the difference in the exam room and working with ISDN in production networks. Configuring and troubleshooting
Category:
When you're studying for the BSCI exam on the way to earning your CCNP certification, it's safe to say that BGP is like nothing you?ve studied to this point. BGP is an external routing protocol used primarily by Internet Service Providers (ISPs).
Category:
Earning your CCNP certification and ing the BSCI exam depends on knowing the details of many Cisco technologies, ISIS chief among them. To help you prepare for exam success, here's a list of ISIS terminology and basic concepts that will help you
Category:
To ern your CCNA or CCNP certifiction, you've got to understnd the bsics of trunking. This isn't just CCNA topic - you must hve n dvnced understnding of trunking nd etherchnnels to pss the BCMSN exm nd ern your CCNP s well. Before we
Category:
Not only is your CCNA exam going to have questions on VLAN trunking protocol, almost any network that has more than one VLAN is going to have VTP running. Whether you're planning on passing the CCNA exam or just brushing up on your networking skills,
Category:
One f the first things yu learned abut Frame is that the LMI als serves as a keepalive, r a heartbeat - and if three cnsecutive LMIs are missed, the line prtcl ges dwn. There's a limitatin t LMI as a keepalive, thugh. The LMI is exchanged
Category:
To pass the BSCI exam an earn your CCNP, you've got to keep a lot of etails in min. It's easy to overlook the "simpler" protocols an services such as static routing an istance vector protocols. With this in min, here's a quick review of some
Category:
Dialer Watch is a vital part of your CCNA and CCNP studies, particularly for the BCRAN exam, but it's one of the most misunderstood technologies as well. To help you pass the CCNA and CCNP certification exams, here's a detailed look at Dialer
Category:
Other links at Computers > Computer Certification
Like TCP, BGP is connection-oriented. An underlying connection between two BGP speakers is established before any routing information is exchanged. This connection takes place on TCP port 179. As with EIGRP and OSPF, keepalive messages are sent out by
Category:
I know from experience that part of the excitement and anxiety of putting together your own CCNA / CCNP home lab is deciding what to buy! While you can make a workable home lab out of almost any combination of Cisco routers and switches, some routers
Category:
When traveling to most cities of the world, finding discount accommodations when arriving to your destination is always a possibility. Not so in the diverse and complex city of San Francisco. From the hills of Daly City to the plains of Berkeley, the
Category:
When you're working on your BCMSN exam on your way to CCNP certification, you'll read at length about how Cisco routers and multilayer switches can work to provide router redundancy - but there's another helpful service, Server Load Balancing, that
Category:
To pass your CCNA exam and earn this coveted certification, you must understand the details of port-based authentication. This knowledge has a great deal of value in production networks as well, since this authentication scheme is regularly implemented.
Category:
Site Sponsor
Directory Statistics
Articles: 68205
Categories: 501
Yahoo Entertainment
