NEW ARTICLES  HOT ARTICLES  TOP RATED  ADD AN ARTICLE  UPDATE AN ARTICLE  GET RATED 
  HOME     MY ACCOUNT     POWER SEARCH     REGISTER     SUPPORT     SUGGEST CATEGORY  

How To Repair Water Damaged Electronics
40641 Computers Jul 30, 2007 idnmedia How To Repair Water Damaged Electronics A lot of people have had their electronic devices come into contact with liquid, whether it's a glass of milk or a bathtub full of water, but most people do not know what they are supposed to do with these items afterward. Can they be fixed? Is there really anything wrong with them? Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation. Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again. Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably. Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired. Jim Corkern is a writer and promoter of quality water damage restoration companies and mold remediation companies across the united states. send email to idnmedia

Write a Review   Add to My Favorite   Refer it to Friend   Report Article  

Average Visitor Rating: 0.00 (out of 5)
Number of ratings: 0 Votes

Visitor Rating


Other links at Computers
If you want to conduct an effective search online, you need to follow a few general rules. The more practice you put in, the faster you will see your results pour in. After using these rules for a while, you will be able to find anything you want on the w
Category:

Does USB availability apply to laptop computers as well as desktop computers? This is a very important question because of the availability of mobile computers, also known as laptop computers or notebooks.
Category:

What happens if your computer information is not safely stored?
Category:

This article entirely focuses on freeware and its advantages.
Category:

Tips and tricks will make it easy for you to create passwords that are safe from fraud thieves yet easy for you to remember. Learn more...
Category:




Site Sponsor
Directory Statistics

Articles: 68252
Categories: 501

Yahoo Entertainment
Valid XHTML 1.0 Transitional   Valid CSS