NEW ARTICLES  HOT ARTICLES  TOP RATED  ADD AN ARTICLE  UPDATE AN ARTICLE  GET RATED 
  HOME     MY ACCOUNT     POWER SEARCH     REGISTER     SUPPORT     SUGGEST CATEGORY  

Basics Of The Pin Tumbler Lock And Its History
29934 Business Jun 20, 2007 idnmedia Basics Of The Pin Tumbler Lock And Its History The basics of the pin tumbler lock goes back to 2000 BC in Egypt. the lock consisted of a wooden post affixed to the door, and a horizontal bolt that slid into the post. The bolt had north to south openings into which fitted a set of pins. These could be lifted, using a key, to a sufficient height to allow the bolt to move and unlock the door. Inventor Linus Yale, Sr. patented a pin tumbler lock in 1848, a designthat was improved and patented by his son, Linus Yale, Jr. He did this in 1861 Yale, Jr.'s is the same design used in pin tumbler locks today. The pin tumbler is most commonly used in cylinder locks but is used in other applications also. In this type of lock, an outer casing has a cylindrical hole in which the plug is housed. To open the lock, the plug must rotate. The plug has a straight shaped slot known as the keyway at one end to allow the key to enter the plug; the other end may have a cam or lever which activates a mechanism to retract a locking bolt. The keyway often has protruding ledges which serve to prevent the key pins from falling into the plug, and to make the lock more resistant to picking. A series of holes, typically five or six of them, are drilled vertically into the plug. These holes contain key pins of various lengths, which are rounded to permit the key to slide over them easily. Above each key pin is a corresponding set of driver pins, which are spring-loaded. Simpler locks have only one driver pin for each key pin, but locks requiring multi keyed entry, such as a group of locks having a master key, may have extra driver pins known as spacer pins. The outer casing has several vertical shafts, which hold the spring loaded pins. Locksmithing this type of lock is a basic part of locksmith training and is one of the most common types of locks worked on by locksmiths on a daily basis. When the plug and outer casing are assembled, the pins are pushed down into the plug by the springs. The point where the plug and cylinder meet is called the shear point. With a key properly cut and inserted into the groove on the end of the plug, the pins will rise causing them to align exactly at the shear point. This allows the plug to rotate, thus opening the lock. When the key is not in the lock, the pins straddle the shear point, preventing the plug from rotating. Sets of locks with a master key will have one set of shear points that are identical to the others in the set and one set that is unique to that specific lock. This is one of the simple locks and one that provides adequate security for the average consumer Jim Corkern is a respected writer and promoter of modern locksmith and writes for several new york locksmith and chicago locksmith companies. send email to idnmedia

Write a Review   Add to My Favorite   Refer it to Friend   Report Article  

Average Visitor Rating: 0.00 (out of 5)
Number of ratings: 0 Votes

Visitor Rating


Other links owned by this user
These simple tips can save you hundreds or maybe even thousands of dollars and greif.
Category:

More accidents happen in the bathroom of a home than any other room. A few quick fixes can make your bathroom safer.
Category:

Do you need to hire a contractor to remove mold? If so, here are some tips on doing so.
Category:

Protect your home from mold, here are some facts you should know.
Category:

Does your roof leak? If so, here are some useful tips on claiming it on you insurance.
Category:

Here are some tips cell phone compines do not want you to know!
Category:

Would you like know how to use mold testing kits? Heres your answer.
Category:

There are many things to consider when remodeling your home, and just as many in the kitchen alone. Here are some helpfull hints.
Category:

Are you prepared for a hurricane? Here are some great tips you should follow.
Category:

How to protect the most two important rooms in the house? Here are some tip you should know.
Category:

How to can your own canned foods properly and keep them mold free.
Category:

Want to save some money? Here are some cheap ways to kill mold.
Category:

Is mold growing in you home? Here are some ways that can help you prevent mold.
Category:

Got mold? Here are some Fun facts you should know.
Category:

Are you looking for a contractor? If so, here are some tips that will help find the most quiflied.
Category:

Do you or someone you know own a condo? If so, here are some tips to save yourself some money.
Category:

Are you trying to sell your home with mold? Here are some tips you can use.
Category:

Do like saving money? Heres are some tips that can save you thousands.
Category:

Are yo looking for someone to build your dream home? Here are some tips that might help out alot.
Category:

Learning the right way to use articles is a vital part of internet marketing and SEO, make sure you are not in the dark!
Category:

Other links at Business
You may know the few and now is definitely the time to name the top favorites
Category:

While very few of us think to check the current rate of crude oil prices, the fact of the matter is that every change in the cost of crude oil makes an impact on our lives.
Category:

Are you a businessman? Want to know what you should wear in the office? Here is the answer.
Category:

Look some what professional while working at home.
Category:

As the owner of a small business there are temptations to join local organizations, but often you wonder if it is really worth the investment in membership fees and time...
Category:




Site Sponsor
Directory Statistics

Articles: 68309
Categories: 501

Yahoo Entertainment
Valid XHTML 1.0 Transitional   Valid CSS