NEW ARTICLES  HOT ARTICLES  TOP RATED  ADD AN ARTICLE  UPDATE AN ARTICLE  GET RATED 
  HOME     MY ACCOUNT     POWER SEARCH     REGISTER     SUPPORT     SUGGEST CATEGORY  

Importance Of Calibration Instruments In Factories
28145 Science and Technology Jun 19, 2007 LowJeremy Importance Of Calibration Instruments In Factories Machines need to be calibrated regularly so these will be able function properly. A licensed engineer or mechanic is the only one qualified to perform such tests and the length of time it takes to inspect one unit could take hours depending on how complex or sophisticated it is. If the machines being checked are in large factory such as one that produces cars, teams are dispatched to conduct the calibration. In most cases, this is done every six months. The only difference is that the people who will do this will go to the plant unlike a car owner who will have to drive the vehicle to the shop. Is there any difference between a machine and a car when it comes to calibration? Yes in terms of the instruments used to conduct such tests. Large ones like those in the factory have to be dismantled and hand held instruments such as frequency counters, multimeters, network analyzers, oscilloscopes, power supplies, spectrum analyzers and RF power meters are used throughout the tests. Automobiles on the other hand are tested using computers and some similar instruments that will be finished much faster than those in the factory so the owner can drive off when this is done. If a problem has been found, the specialist will recommend that the machine should not be used first until a replacement part has arrived. But in minor cases, a simple adjustment will do the trick making it up and running again. But the use of calibration instruments is not only done in factories. These are also done in laboratories to make sure the machines used are able to perform to what it was designed to do. The National Institute of Standards and Technology is responsible for setting the regulations making this all possible. After all, safety begins by those who are designing the prototype until the new product is launched into the market. This will ensure that defects can be avoided and recalls are not necessary since this will cost the company a lot of money. Anything that uses machines will have to be calibrated at one point or another to ensure these are performing well as though these were good as new. The plant may have a crew to do this or a contractor can be called in to perform such services which is really up to those in charge of keeping the place running. Manufacturing, industrial, and even chemigation processes, benefit from the use of a system that includes the use of a calibration column. A system that includes a calibration column in its process allows you to easily determine the flow rate of liquids that are pumped from your manufacturing, industrial or chemigation processes. A calibration column is usually made out of clear PVC with industry grade graduations that measure things such as milliliters per minute and gallons per hour. You can install one calibration column for each pump set to measure pump flow rates. A calibration column is a very important tool. In industrial and chemical processes, precision is of extreme importance and the calibration column assures you of that. All kinds of systems that include processes where liquids are pumped will need the reliability of a calibration column. Pumping system solutions that include calibration columns vary from each other depending on what purpose it will serve. For instance, if industrial chemicals will be introduced into the system, it is important that the graduation marks on the calibration column are protected from chemical corrosion for it to continue to maintain its integrity. If on the other hand, your pumping systems require the strict regulation of flow rates, you need a system with a calibration column that is connected to an emergency release valve to be able to minimize total risk. There are many dependable and reliable pump system solutions provider in the market that can supply the right kind of system with the right kind of calibration column for your needs and requirements. To help you along on your search, you might want to check out some industrial grade systems that include the use of a calibration column for your pumping processes. Cole-ParmerCole-Parmer is an instrument company that distributes various industrial fluid handling products including gear pump systems that come with a calibration column. The company has been around since 1955 and has become one of the largest distributor of instrumentation products that deliver the right solutions to your business. You can check them out online at coleparmer.comKofloKoflo Corporation begun as a family endeavor in the early 1980s and since then has grown in scope and size. They pride themselves in being able and willing to adapt to their customers' needs and requirements to be able to provide to perfect fit in terms of industrial instrumentation solutions. They offer different pumping systems that include calibration columns. You can get a quote from them today at their website-- koflo.com Low Jeremy maintains http://Calibration.ArticlesForReprint.com. This content is provided by Low Jeremy. It may be used only in its entirety with all links included. send email to LowJeremy

Write a Review   Add to My Favorite   Refer it to Friend   Report Article  

Average Visitor Rating: 0.00 (out of 5)
Number of ratings: 0 Votes

Visitor Rating


Other links owned by this user
Professionals are respected by peers and clients but it took many years for them before arriving in that stature. Most if not all professionals need a degree to prove that they indeed have the right to be called a professional in their chosen field.
Category:

A solution is the result of the method or process of finding the answer to a problem. A business is a complex system that, simply put, needs to constantly find solutions to problems tied to productivity and cost. Now, each business has a product.
Category:

Machines need to be calibrated regularly so these will be able function properly. A licensed engineer or mechanic is the only one qualified to perform such tests and the length of time it takes to inspect one unit could take hours depending on how complex
Category:

There was a time that the analysis of spectral composition whether it is an electrical, acoustic or optical waveform was done using a large machine similar to those used in a recording studio.
Category:

Arkansas as a state provides an excellent performance in its economic and developmental growth, better enhanced by its flourishing expansion in venture capitals in every aspect of the latest technologies, and other innovations over the past years.
Category:

Generally, a spectrum analyzer is a device that measures and analyzes signals throughout the electromagnetic spectrum. The analyzer divides into parts signal and splits them into an amplitude component and a frequency component.
Category:

Being overweight, drinking a lot of alcohol and not eating right contribute to high blood pressure. The person may not notice anything wrong now but in a few years, this will come in the form of a stroke that could either kill or leave anyone paralyzed.
Category:

The prospect of having to get down to tax filing preparations can get you down. The process of tax filing preparations is tedious and can be difficult to factor in to your busy schedule. Luckily, aside from hiring an expensive certified public accountant
Category:

The best way to start your entry to triathlon is by joining mini triathlon. In this way, you avoid over-training yourself that might end up losing your stint in the competition.
Category:

Once a woman fails to conceive within a 1-year period without using any techniques for birth control, she is most likely to have developed infertility. If she does not have clinical representations of the condition, then perhaps the test must be focused o
Category:

In the first trimester, headaches occur because of hormone changes you experience while in the third trimester, headaches are felt because of your having to carry additional weight and changes in your usual posture.
Category:

Metal detectors are interesting pieces of technology. They have a variety of uses and have become even more versatile throughout the years. Ever since the first metal detectors came out in the 19th century, scientists and engineers never stopped working o
Category:

A popular pop group some years back produced a hit entitled Barbie Girl. In the song, the pop group didn't paint a good picture of Barbie, portraying Barbie as a real person with low morals and a superficial personality.
Category:

When people need to enlist the services of a company, that person will usually check for it in the phone directory. It is only after browsing through the names on the list that the individual will be able to get in touch with the firm that can do it.
Category:

Everybody has seen and have been subjected to security metal detectors. They are everywhere: at the entrances of high security building, at the airport, etc. The added security of having metal detectors manages risk properly and should be utilized more.
Category:

Boys have teddy bears and action figures while girls have dolls. Not much has changed throughout the years even if computer games have been invented because there should always be something that distinguishes between being masculine and feminine.
Category:

Buying a house or a car is a huge decision because of the money involved. This is the reason that customer will look into the budget first and check if the salaries of the spouses can pay the monthly amortization before pushing through with the deal.
Category:

There are many ways to raise money for a good cause. One of the first things to think about is what cause to work for and then move from there. The individual can do some research on the web about the various organizations and then see if the one can fit
Category:

Migraine headaches affect about 15 percent of the population. Although men can actually suffer from migraines, it is the women that are more affected.
Category:

Whether you are studying to be a professional photographer or just want to be more adept with your hobby, it is important to realize that light is one of the most important factors to consider when taking a photograph. After all, the etymology of the word
Category:

Other links at Science and Technology
Information about depleted uranium in tank and artillery shells.
Category:

A guide to clean air purifiers!
Category:

This article talks about the history and benefits of digital cameras. Other features such as storage media and power are covered as well.
Category:

There are many reasons that people decide to use a GPS Tracking System on their vehicle. For parents, one reason would be to track their teenagers whereabouts. Read on to learn more.
Category:

This article compares two types of weapons SCUD missile and the SA-8 platform.
Category:




Site Sponsor
Directory Statistics

Articles: 68309
Categories: 501

Yahoo Entertainment
Valid XHTML 1.0 Transitional   Valid CSS