Some Useful Equipment for Wood Carving
22718
Home & Family > Hobbies
Apr 25, 2007
Some Useful Equipment for Wood Carving
Before we start the wood carving, it is very necessary to check all the equipment which are required during the process. Find out some of the equipments which are needed for the wood carving. The screw cramp This is of German design and used in the same way as the 'G' cramp. Sash cramps These range in length from 3 ft. to 6 ft. and are used by joiners for assembling frames. For this reason the jaws are only 2 in. or 3 in. long. The carver will find them useful in gluing up large work if he uses them in pairs with a stout board on each side of his work. In figure 10 the arms of a figure are being glued up at the shoulders. The sloping stand or table With the help and advice of friends I have recently evolved this piece of equipment and have found it excellent for carving both wood and stone panels. For anyone with a little knowledge of carpentry it is a fairly simple piece of construction. The framework is made of wood 2 inch x 2 inch and the main board is 36 inch x 16 inch The whole stand could be made smaller or larger, according to your own requirements. You will see from the picture of the back view illustrated that the stand is adjustable on the deck-chair principle. This particular model can be used at three different angles. The hinges on the supporting frame should be of a heavy type and not less than 2 inch in width as they will have to stand up to a good deal of vibration. The wood of the main board should be at least 1 in. in thickness. The wood to be carved can be fixed on by bench screws, 'G' cramps, or by ordinary screws. This stand can be easily bolted down to the bench. The advantage of a sloping stand is that you can stand upright to carve and step back to see your work. Other methods of fixing a panel If you want your work flat on the bench, and many carvers do, it is an easy matter to fix the panel. Bench screws can be used (see Fig. 9). The length of these can be varied by interposing a block of wood between the wing nut and the underside of the bench. You can also fix a frame of wood around your carving and drive in a few wooden wedges to hold it tight (Fig. 37). If you are working on a fairly heavy piece of wood, two wood stops screwed down at right angles to each other will be sufficient. With all the guidelines which are provided in this article, now we know the things which are required for the wood carving. Check for some carpentry equipment available, which you might also need it during the wood carving process.
Mitch Johnson is a regular writer for http://www.kitchen-plans-n-designs.com/ , http://www.ezcollectablesguide.info/ , http://www.goodbudgetholiday.info/
Write a Review
Add to My Favorite
Refer it to Friend
Report Article
Other links at Home & Family > Hobbies
Stencils are not just fun things for your kids to play with or for the serious artist. Anyone can use stencils to improve their home decor. Take a look at the ideas in this article and start making the most of stencils today.
Category:
So you?ve decided to keep tropical fis! Welcome to tis unique and fascinating obby. But before we get aead of ourselves, we need to realize tat aquariums can be a lot of work. You ave to keep te water in your aquarium clean and aerated, te fis
Category:
Until recently, growing annual flowers, either outdoors or with a hydroponics system, meant having just a few choices--among them geraniums, impatiens, marigolds and red salvia. Today that's changed as a number of other options are available to spice up a
Category:
A cross tattoo, perhaps more than any other image in Western culture, gives its wearer the opportunity to make a religious statement.
Category:
ost people I know collect one thing or another. I know hardly anyone who doesn't have at least a tiny obsession with a strange object. Let me share with you the object that I love to collect: spoons. Yes, you read that right, I love to collect spoons.
Category:
Site Sponsor
Directory Statistics
Articles: 68307
Categories: 501
Yahoo Entertainment
