Digital Photography: White Balance Demystified
10799
Arts & Entertainment > Photography
Mar 1, 2007
Jennifer Clarkson
Digital Photography: White Balance Demystified
The term ?white balance? originates from the world of video imaging where a device (waveform monitor) was used to match or ?balance? the signals from the camera?s red, green, and blue channels to make accurate whites under various lighting conditions, thus balancing your white. In this article, we?ll use ?white balance? for digital cameras in a similar sense: the process of measuring your light source?s colour temperature accurately, based on your lighting conditions, and using that information to correctly balance your whites and colours.
Symptoms of poorly set white balance
If your camera?s white balance is set incorrectly, or if your camera chose the wrong algorithm for measuring colour temperature, then you will observe a colour cast on your image: it will either look slightly blue, slightly orange, or slightly green. A low colour temperature shifts light toward the red; a high colour temperature shifts light toward the blue. Different light sources emit light at different colour temperatures, and thus the colour cast. Let?s take a look.
What is colour temperature and how is it measured?
Colour temperature is effectively the warmth that is emitted from a light source, and the effect that temperature has on the intensity of any particular colour in the visible spectrum. For example, a 200 W bulb has more intensity in the orange/red end, and shows purples and blues with very little intensity. This makes your photo appear ?warm?. Daylight has equivalent intensity across the whole spectrum, so you see purples and blues with the same intensity as oranges and reds. But shade or a heavily overcast sky has more intensity in the blue/purple end, so your oranges and reds will have very little intensity. This makes your photo appear ?cool?.
Here are some examples of colour temperatures from common light sources:
1500 K: candle light
2800 K: 60 W bulb
3200 K: sunrise and sunset (will be affected by smog)
3400 K: tungsten lamp (ordinary household bulb)
4000-5000 K: cool white fluorescent bulbs
5200 K: bright midday sun
5600 K: electronic photo flash.
6500 K: heavily overcast sky
10000-15000 K: deep blue clear sky
Newer light sources, such as fluorescent and other artificial lighting, require further white balance adjustments since they can make your photos appear either green or magenta.
How does a digital camera auto-detect white balance?
Your camera searches for a reference point in your scene that represents white. It will then calculate all the other colours based on this white point and the known colour spectrum. The data measured from its R G B sensors is then run through a whole lot of numbers and predetermined equations to figure out which white balance setting is most likely to be correct. Remember, white balance is the automatic adjustment that makes sure the white colour humans observe will also appear white in the image.
Setting your camera?s white balance to AWB will provide colour accuracy under many conditions. Your camera will adjust the white balance between 4000K ? 7000K using a best guess algorithm. Auto white balance is a good choice for situations where the light changes over time and speed is an issue (e.g. animal photography, sports photography). However, you should avoid using auto white balance settings in the following situations:
1) Your scene is heavily dominated by one colour
2) Colour accuracy is absolutely imperative
3) You are photographing particularly warm or cool scenes (e.g. a sunset)
White Balance Presets
Most digital cameras come with multiple white balance preset options. These presets work well when:
1) The light source matches one of the preset white balance options
2) Your scene is heavily dominated by one colour
Let?s review the most common preset options:
Tungsten - "Tungsten" is the name of the metal out of which the bulb's filament is made. The color temperature of this setting is fixed at 3,000K. Best Use: indoors at night. Otherwise, your exposure will turn out too blue. Creative Use: Set your exposure compensation to -1 or -2 and use this setting in daylight to simulate night.
Fluorescent - The color temperature of this setting is fixed at 4,200K. Best use: Fluorescent, mercury, HMI and metal halide lights used in your garage, sports stadiums and parking lots. Otherwise, your exposure will turn out too purple.
Daylight - The color temperature of this setting is fixed at 5,200K. Best use: studio strobe lights. Otherwise, your exposure may have a slight bluish tinge.
Cloudy - The color temperature of this setting is fixed at 6,000K. Best use: direct sunlight and overcast light. This setting will warm your photo by giving it an orange tinge, which is often desirable in landscapes and portraits. Creative Use: sunsets.
Shade - The color temperature of this setting ranges from 7,000K - 8,000K. Best use: shooting in shade, no direct sunlight (cloudy), backlit subjects. Otherwise, your exposure will turn out too orange. Creative Use: direct sunlight ? it will warm up your photos even more!
Flash - The color temperature of this setting is fixed at 5,400K. This is almost identical to Cloudy but sometimes redder depending on the camera. Best use: overcast skies. Otherwise, your exposure will turn out too red. Jennifer Clarkson is a Canadian photographer living in Ottawa. For more Photography Tips, and to browse her Photo Galleries, please visit her website at www.jclarksonphotography.com Article Submission made possible by: www.articles-submit.com Courtesy of:ArticlesRus.Net
Symptoms of poorly set white balance
If your camera?s white balance is set incorrectly, or if your camera chose the wrong algorithm for measuring colour temperature, then you will observe a colour cast on your image: it will either look slightly blue, slightly orange, or slightly green. A low colour temperature shifts light toward the red; a high colour temperature shifts light toward the blue. Different light sources emit light at different colour temperatures, and thus the colour cast. Let?s take a look.
What is colour temperature and how is it measured?
Colour temperature is effectively the warmth that is emitted from a light source, and the effect that temperature has on the intensity of any particular colour in the visible spectrum. For example, a 200 W bulb has more intensity in the orange/red end, and shows purples and blues with very little intensity. This makes your photo appear ?warm?. Daylight has equivalent intensity across the whole spectrum, so you see purples and blues with the same intensity as oranges and reds. But shade or a heavily overcast sky has more intensity in the blue/purple end, so your oranges and reds will have very little intensity. This makes your photo appear ?cool?.
Here are some examples of colour temperatures from common light sources:
1500 K: candle light
2800 K: 60 W bulb
3200 K: sunrise and sunset (will be affected by smog)
3400 K: tungsten lamp (ordinary household bulb)
4000-5000 K: cool white fluorescent bulbs
5200 K: bright midday sun
5600 K: electronic photo flash.
6500 K: heavily overcast sky
10000-15000 K: deep blue clear sky
Newer light sources, such as fluorescent and other artificial lighting, require further white balance adjustments since they can make your photos appear either green or magenta.
How does a digital camera auto-detect white balance?
Your camera searches for a reference point in your scene that represents white. It will then calculate all the other colours based on this white point and the known colour spectrum. The data measured from its R G B sensors is then run through a whole lot of numbers and predetermined equations to figure out which white balance setting is most likely to be correct. Remember, white balance is the automatic adjustment that makes sure the white colour humans observe will also appear white in the image.
Setting your camera?s white balance to AWB will provide colour accuracy under many conditions. Your camera will adjust the white balance between 4000K ? 7000K using a best guess algorithm. Auto white balance is a good choice for situations where the light changes over time and speed is an issue (e.g. animal photography, sports photography). However, you should avoid using auto white balance settings in the following situations:
1) Your scene is heavily dominated by one colour
2) Colour accuracy is absolutely imperative
3) You are photographing particularly warm or cool scenes (e.g. a sunset)
White Balance Presets
Most digital cameras come with multiple white balance preset options. These presets work well when:
1) The light source matches one of the preset white balance options
2) Your scene is heavily dominated by one colour
Let?s review the most common preset options:
Tungsten - "Tungsten" is the name of the metal out of which the bulb's filament is made. The color temperature of this setting is fixed at 3,000K. Best Use: indoors at night. Otherwise, your exposure will turn out too blue. Creative Use: Set your exposure compensation to -1 or -2 and use this setting in daylight to simulate night.
Fluorescent - The color temperature of this setting is fixed at 4,200K. Best use: Fluorescent, mercury, HMI and metal halide lights used in your garage, sports stadiums and parking lots. Otherwise, your exposure will turn out too purple.
Daylight - The color temperature of this setting is fixed at 5,200K. Best use: studio strobe lights. Otherwise, your exposure may have a slight bluish tinge.
Cloudy - The color temperature of this setting is fixed at 6,000K. Best use: direct sunlight and overcast light. This setting will warm your photo by giving it an orange tinge, which is often desirable in landscapes and portraits. Creative Use: sunsets.
Shade - The color temperature of this setting ranges from 7,000K - 8,000K. Best use: shooting in shade, no direct sunlight (cloudy), backlit subjects. Otherwise, your exposure will turn out too orange. Creative Use: direct sunlight ? it will warm up your photos even more!
Flash - The color temperature of this setting is fixed at 5,400K. This is almost identical to Cloudy but sometimes redder depending on the camera. Best use: overcast skies. Otherwise, your exposure will turn out too red. Jennifer Clarkson is a Canadian photographer living in Ottawa. For more Photography Tips, and to browse her Photo Galleries, please visit her website at www.jclarksonphotography.com Article Submission made possible by: www.articles-submit.com Courtesy of:ArticlesRus.Net
Write a Review
Add to My Favorite
Refer it to Friend
Report Article
Other links owned by this user
First, let?s review te tree tings tat directly influence ow all potos are captured on bot film and digital cameras: 1) Aperture: te lens opening 2) Sutter Speed: te speed of opening and closing te sutter, wic determines
Category:
The term ?white balance? originates from e world of video imaging where a device (waveform monitor) was used to match or ?balance? e signals from e camera?s red, green, and blue channels to make accurate whites under various lighting conditions,
Category:
So you've decided to buy a camera - congratulations and welcome to the land of Photography! Now how do you figure out what camera is right for you? The first thing you have to decide is whether you want a digital camera or a film camera. This article
Category:
Most humans see the world in living colour, but did you know that your camera?s light meter does not? Then how does it capture photos? Does it see the world in black and white? No! When your camera left the factory, it was calibrated to see the world as
Category:
What is a Memory Card? A card is a storage device commonly used by digital cameras to write digital photos. It is a mechanism to store your photos, and later transfer them to computer for processing and printing. Essentially, a
Category:
Typical humans see their world in 16 "f-stops", or measurements of light reflecting off their environment. Cameras ?see? no more than 5 stops at once. So the more contrast there is in the scene, the more stops of light there are to BE seen. This
Category:
Shutter Speed, simply put, controls the speed at which the camera?s lens opens and closes. It works in conjunction with film speed (a.k.a. ISO) and aperture (lens opening size) to correctly expose an image. By using the Shutter speed priority setting on
Category:
Waterfalls often make great subjects of photos, but it?s very easy to get a bad result if you?re not paying attention when you click the button. Here are the top 4 mistakes photographers make, and the easy ways to improve your
Category:
Other links at Arts & Entertainment > Photography
Why still use black and white? If you have watched the controversial movie "Schindler's List" (1993) by Steven Spielberg, it has been presented in the screens in black and white color. Critics were expressing dissatisfaction, and to some degree, one could
Category:
The first thing to do if you want to make money from photos is learn how to take great ones. In the world of commercial photography clarity sells. The subject of how to take a good photo is too comprehensive for one article, however the following is
Category:
Avoid shooting directly at reflective materials if you do not want to spoil your photos. Learn how to shoot a reflective material as the subject.
Category:
Photography is much more than choosing a scene and getting the view on film. In the world of photography, Ansel Adams photographs are a force to reckon with.
Category:
Talks about the process of digital photo slide scanning. The article also discusses scanners and other related equipment.
Category:
Site Sponsor
Directory Statistics
Articles: 68228
Categories: 501
Yahoo Entertainment
